Skip to content

Roof

Building regulations: New Roofs - Weight (Loading)

The loads (weights) to be supported are from various sources:

  • Materials: This would include tiles, battens, felt, insulation etc.
  • Weather: e.g. wind, snow and rain
  • Maintenance: A person needing to access the roof in order to repair items

Wind Load

The roof should be tied down to the structure to stop it from lifting in times of strong winds. This is normally achieved by providing straps that are approximately 1.2m long with a cranked end which is fixed to the wall plate (to which the roof timbers are fixed) and then the inner skin of the wall at every 2.0m centres.

Spreading

The timbers that make a pitch roof (rafters), will always want to spread apart. Ceiling joists are a way of stopping this as they are fixed to the bottom end of the rafters and stop them from pulling apart. However, if you wish to take away the ceiling and be able to see the roof, then another system should be used to tie down the rafters to the walls and stop them from spreading. For a roof that is to be exposed with no ceiling joists, you may wish to seek advice from an engineer.

Find a Trade Professional

Use our partner directories from CIAT, FMB or RTPI to find an chartered architectural technologist, builder or planning consultant to help with your project or development.

Find a professional


Useful links

Make an application Planning consultancy calculator

      The Planning Portal is delivered by PortalPlanQuest Limited which is a joint venture between TerraQuest Solutions Limited and the Department for Levelling Up, Housing and Communities (DLUHC). All content © 2024 Planning Portal.

      The Planning Portal is delivered by PortalPlanQuest Limited which is a joint venture between TerraQuest Solutions Limited and the Department for Levelling Up, Housing and Communities (DLUHC). All content © 2024 Planning Portal.